Wire Worked Candle Wreaths

For every holiday I enjoy putting together a special table display. It ties together the feel of the holiday and gives everyone something special to look at while we gather around the table. This year for my Thanksgiving table I have made some wire wrap wreaths to put around candles. Learn how to make wire wrapped candle wreaths for your own Thanksgiving or any other celebration.

Wire Wrapped Candle Wreaths Video Tutorial with Candie Cooper

[Read more…]

Let’s Make a Ring: Beadalon Flat Artistic Wire Ring

Today I will show you how to make a cute ring made with Beadalon Flat Artistic Wire. There are very few tools required for this ring and you don’t have to have a lot of wire working experience to make it. Anyone can make this project and have a great ring to wear in about 30 minutes or less. Let’s get started on our own Flat Artistic Wire Ring.

Read below to see the supplies and steps to create this tab ring. You can also watch the FaceBook live video that I hosted about this project for a step-by-step tutorial.

[Read more…]

Using a Wire Guardian to Protect Your Beading Wire

Using a wire guardian to protect your beading wire Many of us use beading wire for our projects. My favorite beading wire is from Beadalon and is 49 strands. This is a perfect go-to wire for any project. When the finished piece is something that is going to we worn often you want to make sure to protect the bead wire. By using a wire guardian to protect your beading wire you can lengthen the life of your jewelry.

Spring cleaning was at the top of my list the other week and I was going through my TV projects that I had left over. A little secrete between you and me is that most of the time when I create a design for a TV show the piece is not finished in the back. When the show is over I have a pile of projects that are designed and just shy of being finished and ready to sell or wear. I found this great piece that I designed for kits on JTV with Dakota Stones. Having never finished this piece I wanted to turn it into a great over the head necklace, my favorite.

Using a wire guardian to protect your beading wireTo finish off the necklace I will be adding some Lipstick Ranch chain to give it the extra length that I want. Rather than just using a regular jump ring to connect my chain I will be using a decorative bail as my connector. Since there will be movement of the beading wire through this connector I will be using a wire guardian to protect the beading wire and extend the life of my necklace.

Beadalon Wire GuaradinA wire guardian is a horseshoe shaped finding that had two tunnels at each end and a channel across the top. Your beading wire will go through the tunnel, over the track and back through the other tunnel. Before you attach your wire guardian be sure to add a crimp tube. To find the size crimp tube you need be sure to look at the packaging, it will tell you on the front. If you are new to beading wire you can see my post about choosing the right beading wire that I did for you. Once you string your wire through the wire guardian and your bail then you will crimp your wire as normal.

Choosing the right beading wire

After I crimped the beading wire to hold the bail on I decided that I wanted to cover the crimp tube to clean up the design a little more. You can use any color crimp cover that you like for your piece. The crimp cover adds finishes the piece off just one step more.Using wire guardians to protect your beading wire

You can see the Facebook Live show that I did showing how to use wire guardians and how I created this project on my Facebook page or below in this post. I always recommend using wire guardians when the piece will be worn often or in a high traffic area, like a bracelet.

Post your pictures on my Facebook page of any projects that you create that use these techniques. Join me each weekday at 2:30pm EST for a Facebook Live video with a new project.

Using a wire guardian to protect your beading wire

Using a Wire Guardian Facebook Live Video:

 

Making Baked Marble Jewelry

Baked Marble Jewelry

“You Crack Me Up”

Making jewelry from cracked marbles is a wonderful way to use found objects that you might not typically think to use in your projects. Baked marble jewelry is a project that you could make with your kids and teach them a little about science in the process. If you take some time to look on Pinterest you can find many projects to make with the baked marbles technique, but today I am going to talk to you about turning them into a beautiful pair of custom earrings.

Baked Marble Jewelry Supplies List:

Before getting started there are a few things that you will need to think about. First, this project is made in the oven at a high temperature and for a solid amount of time. I suggest doing this on a day that isn’t too hot or it will make your house hot too, but it can be done whenever you like. When you pick out your supplies for your baked marble jewelry you will need to look for clear marbles. Opaque marbles will not work well for this project. Due to the nature of the coloring in opaque marbles you won’t be able to see the cracks in the marble, which is what is giving us the uniqueness of the piece. Another tip that I found was to not use the two tone marbles. You can see below how my marbles turned out and I have a few that were multi colored that worked out just fine. Be sure to make a few extra marbles to be sure you have two that you like for your earrings.

Baked Marble Jewelry Directions:

You may be surprised at how easy it is to get the cracked effect in the marble. You will preheat your oven to 500 degrees (F) and then bake the marbles for 20 min. Once you have baked them long enough you will take them out and immediately dunk them into your ice water. As the marbles hit the ice water you will start to hear them crack.

After the marbles have been cracked and cooled you will then be able to assemble them into your earrings, or whatever piece you want to create.

Baked Marble Jewelry After Cracked ImageAssembly of Baked Marble Jewelry:

Cage CharmsIn this tutorial we are talking about making earrings. If you have one marble that you really love and there isn’t a match to make earrings with you could always get one of the cage pendants that I have in stock in my Etsy shop to display the marble. The cage charm will allow you to display your favorite marbles and change them out to match what you are wearing.

For the video tutorial below I made a pair of earrings. In order to attach the marble to earring wires I added a bead cap with glue. Be sure to use E6000 on this project NOT super glue. If you use super glue you run the risk of frosting the marble if you get excess glue on it. Super glue will frost any glass surface once it dries, this will hide the cracked effect that you worked to put into the marble. Before you start glueing your piece together be sure that the marble is completely dry. Any moisture on the marble will not allow the E6000 to adhere securely. One tip about using the E6000, be sure to pull the glue away quickly when you are finished. If you pull it away slowly you will get the strings as you would see if working with hot glue.

Ann Gardan bead caps are one of my favorites and what I really wanted to use in my baked marble jewelry. As I was putting the piece together I noticed that my Ann Gardan bead cap did not give me enough contact with the marble. Without a fairly flush connection (you want as much surface area connection as you can) you run the risk that the marble will come off of the bead cap if stressed. To get more contact between the bead cap and marble I decided to add another bead cap that had better contact first and then stacked the second bead cap on top. Finishing off the earring I used a wrapped loop to keep the stack of beads together.

When choosing your bead cap you will want to test out the size of your head pin. If the head pin is too small it will fall out of your bead cap and you won’t be able to put another in once it is glued. As you test your bead cap and head pin size together if you find that it is too small just add a spacer bead to the head pin before threading it through the bead cap. This will stop it from falling out.

Baked Marble Jewelry Finished MarblesDrying Tip:

After you have glued your piece together you will need to allow the glue to dry for about 12 hours to be sure that it is completely dry. It is tricky to set up a round object to dry without moving the stack of beads on the top. My tip for allowing the pendant to sit up right is to use a bowl of uncooked rice. This will give your marble a nice bed to sit upright as to not move the glued bead cap on the top.

The Facebook Live video posted below will walk you through the creating of the baked marble jewelry that I made today. Please share any items that you make from this technique on my Facebook Page. Like the Facebook page to be notified of what is going on and you will be able to see the Facebook Live Videos. I go live every weekday at 2:30pm EST, unless I am traveling, with a new project idea for you. See you around online!

 

Join me at the Country Living Fair in Nashville

Country Living Fair 2017

At the end of April I will be attending the Country Living Fair to teach two classes. This will be my first time at the event and I can’t wait to get there and see all the artsy goodness! Be sure to head to check out the Country Living Fair website to get the details about the event. There is also a list of all of the classes that they will be offering on their site. I hope to see you there and have you in classes, registration is open now.

Classes:

At the event I will be teaching two beginner classes. Both of my classes will be on Sunday the 23rd. This event is being sponsored by JoAnn Fabrics and Crafts. What this means for you is that all of the workshop supplies will be provided for you in my classes. All you need to bring is yourself and your creativity! Special thanks to JoAnn for sponsoring this event.Country Living Fair Cutting a Concho Pin or Pendant

My first class is Floral Concho-Pin or Pendant. If you have been following me for a while you will have seen that I wear a similar pin on my jean jacket and in this class I will teach you how to make your own. In this class you will learn how to use a Sizzix machine to easily cut leather and fabric pieces and rivet them together to make a pin or pendant.  We will also play with Vintaj Patina paints, beads, chains and more.  It’s a good class for beginners or advanced jewelry makers.  If you love embellishing you will love this class!

The workshop will last approximately one hour and all the necessary supplies will be provided for your use at the workshop (just bring yourself). Country Living Fair Silk Knotting Made Simple

The second class that I will be teaching on April 23rd is Silk Knotting Made Simple. Are you ready to revive that vintage necklace? Or maybe grandma’s pearls? In this class, students will string a unique blend of beads from JoAnn’s then set to knotting.

You will learn how to decorate Vintaj pendants with paints, finish the silk ends, hang a sweet brass pendant and attach to a decorative chain to create a beautiful layering necklace. The knotting process can be a great stress reliever too, I’ve found. To make knotting with silk easier we will use the “Knot a Bead” tool from Beadalon. The workshop will last approximately one hour and all the necessary supplies will be provided for your use at the workshop.Country Living Fair Silk Knotting Made Simple Tool

How to sketch your jewelry designs

sketching jewelry designs with Candie CooperIn preparation for Bead Fest Santa Fe I have been designing some new classes. The first step that I take when working on class material is the sketching process. I thought that I would share with you how I go through sketching jewelry designs. [Read more…]

Hammered Filigree Earrings with Beadalon Chasing Hammer

On today’s show I showed you how to take simple filigree pieces and make them into something artisan and handmade as hammered filigree earrings. *This video was sponsored by Beadalon but all opinions are my own.*

To complete this project I started with some filigree pieces, you can use any that you find at your local store. I then used ball side of my Beadalon chasing hammer and small bench block to create the texture. You will want to make sure that you have something under the bench block to help dampen the sound. For this project I used a folded up bead mat. [Read more…]